next up previous contents
Next: Full Cool Down Up: Begin Condensing Previous: Disconnecting the Pump Cart   Contents


  1. Select Refrigerator.
  2. Select Start the Condensation Cycle.
  3. A window will pop, which says,

    This will start the condensation cycle.

  4. Press Yes.

This will begin condensing the mixture into the dilution unit, and start the cool down to base. It takes roughly 3 to 4 hours to reach base temperature, depending on the cold mass.

Figure 5: Heading down to Base.
[Begin Condensing.] \includegraphics[width=.31\textwidth]{figures/start_condensing.eps}

Jonathan Ouellet 2014-08-26